MORI SEIKI NZ2000 3 TURRET 2 SPINDLE CNC MULTIAXIS TURNING CENTER - MORI SEIKI NZ2000

Manufacturer

MORI SEIKI

Manufacturing Year

2007

Stock Number
12465
Serial Number
Model
NZ2000
Location
Type
CNC LATHE
Request a Quote
Specifications Below
Specifications

Chuck Size 1 COLLET CHUCK 65MM CAP, ONE 8� 3-JAW CHUCK
Maximum Swing 33.5"
Swing Over Cross Slide 31.5"
Maximum Turning Diameter 11.8"
Maximum Distance Between Spindles 44.4"
Maximum Turning Length 31.9"
Maximum Bar Capacity -Both Spindles 2.5"
X Axis Travel X1/X2/X3 8.3"
Y Axis Travel Y1/Y2/Y3 4.3"
Z Axis Travel Z1,Z2/Z3 11.8" / 31.9" / 11.8"
C Axis Movement C1 / C2 both 360,000 Positions
B Axis Subspindle 34.3"
Spindle Nose / Spindle Bore - Both A2-6"/2.9"
Spindle Speeds Left / Right 5,000 RPM
Spindle Motor - Both 2 Spd Geared 33.3 HP
Upper Rotary Tool Motor / Speeds 10 HP / 6,000 RPM
Number of Turret Positions - All Trts 16 Ea. X 3 trts.
Rapid Traverse Rates X / Y / Z 1181 / 787 / 1968 IPM
Machine Dimensions not available
Machine Weight 20,900 lbs.


Equipped With

Mori Fanuc MSX 701E CNC Control
Three Turrets (2 upper / 1 lower)
Twin Spindles
Y Axis Capability All 3 Turrets
Full "C" Axis Spindle Rotation
Live Milling/Drilling Capability Both Turrets
Collet Chuck on Main Spindle and two 3-jaw chucks
Coolant System
Air Blow on Chuck
Barfeed Interface
LNS Quick Load Servo 3 Barfeed System
Chip Conveyor
Overhead Parts Catcher
Right Side Parts Conveyor System
Tool Presetter - Both Spindles
Manual Pulse Generator
MAPPS Conversational Programming
Mist Blaster
Mori-Net
1280 Meters of Memory
DNC By Memory Card
Program Restart
Inverse Time Feed
Rigid Tapping on Mill Head
8x Radial drilling and milling head
1x Radial drilling Two-sided and milling head
10x Axial drilling and milling head

MORI SEIKI NZ2000 3 TURRET 2 SPINDLE CNC MULTIAXIS TURNING CENTER

Stock Number

12465