Chiron DZ-15K IWW Magnum

Twin Spindle Vertical Machining Center

November 27, 2013

Vertical CNC-machining centre model DZ 15K W Magnum high speed

Drilling capacity in steel 2 x Ø 36 mm (with insert drill) Tapping capacity 2 x M 24

Milling capacity in steel 2 x 150 cm³/min

COLUMN MOVING MACHINING CENTRE

with machine bed in mineral cast technique and integrated workpiece swivel table

Suitable for dry-machining with optimized chip drop

VCDZ15WDSKM

Main Spindle drive with 2 AC-motors

9,5 KW at 100 %

14,0 KW at 15 % for mainspindle

Spindle speed range: 20 - 12.000 rpm - max.90 Nm

VC01100765

Travel:

X-axis 630 mm

Y-axis 400 mm

Z-axis 360 mm (plus distance from spindle nose to table surface, according to data sheet)

Spindle distance in X-axis 320 mm

VC01102990

Automatic tool changer

No. of tools 2 x 24

Tool shaft HSK A 63 DIN 69893

Max. tool dia. 78 mm if all magazine pos. are occupied Max. tool dia. 140 mm if adjacent places are free

Max. tool length 300 mm Max. tool weight 5,0 kg

Chip-to-chip-time appr. 2,4 s (depends on CNC)

VC01104185

Integrated Workpiece swivel table IWW 0/180 degrees

for optimal chip drop, with center divider

workpiece swivel time appr. 3,5 s weight-dependent, self-regulating through self-learning speed-control

table loading capacity per side 0 - max. 250 kg,

max. 120 kg weight difference between the two table sides. Per table side integrates:

- NC-rotary-table, type ATU 200 with hydraulic clamping repetition accuracy ± 15",

load moment of inertia (without turning supply) 5,76 kgm² face plate dia. 225 mm,

with center bore dia. 50 H7 mm, fixture pin dia.16 h7, 4 fixture bores M10,

- CHIRON standard fixture for rotary table

bridge size 800 mm

counter bearing with hydraulic clamping

flange plate incl. connecting couplings and quick-locator, on side of the rotary table

flange plate incl. connecting couplings and quick-locator, on side of the counter bearing

2 x 2-core energy supply pneumatic or hydraulic swing radius 225 mm

- 4th or 5th NC-axes, complete

- pneumatic supply without control

Hydraulic unit continuous duty pressure: 210 bar

incl. valves and pressure stage for supply of clamping rotary table and counter bearing with hydraulic connections

VC01107395

AC-servo motors

for x-, y- and z-axes

digital direct drives with indirect absolute path measuring system rapid traverse in all axes 60 m/min.

acceleration: 0,5 g in X axis 1,0 g in Y axis

1,2 g in Z axis

Remark:

With normal conditions the machine does not have to be anchored to the floor. (For slippery floors we recommend anchoring.)

VC01108085