HAAS DUAL SPINDLE, DS-30SSY, Y-AXIS, 8" CHUCKS, LIVE TOOLS NEW 2015

Manufacturer

HAAS

Manufacturing Year

2015

Serial Number

3102947

Model
DS-30SSY
Location

ON LOCATION

Type
CNC Lathes
Request a Quote
Specifications Below
Specifications

SWING DIAMETER S.A.E METRIC
Over Front Apron 31.8 in 806 mm
Over Cross Slide 20.8 in 527 mm
Over Second Spindle 21.8 in 552 mm
CAPACITIES S.A.E METRIC
Chuck Size 10.0 in 254 mm
Max Cutting Diameter (varies with turret) 18.0 in 457 mm
Max Cutting Length (without workholding) 23 in 584 mm
Bar Capacity 3.00 in 76 mm
TRAVELS S.A.E METRIC
X Axis 12.5 in 318 mm
Z Axis 23.0 in 584 mm
FEEDRATES S.A.E METRIC
Rapids on X 472 ipm 12.0 m/min
Rapids on Y 472 ipm 12.0 m/min
Rapids on Z 945 ipm 24.0 m/min
AXIS MOTORS S.A.E METRIC
Max Thrust X 4100 lbf 18238 N
Max Thrust Y 2300 lbf 10231 N
Max Thrust Z 5100 lbf 22686 N
SPINDLE S.A.E METRIC
Spindle Nose A2-6 A2-6
Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive
Max Rating 30.0 hp 22.4 kW
Max Speed 4500 rpm 4500 rpm
Max Torque 275 ft-lbf @ 600 rpm 373 Nm @ 600 rpm
Spindle Bore ø 3.50 in 88.9 mm
MAIN SPINDLE C AXIS S.A.E METRIC
Max Rating 5.0 hp 3.7 kW
Positioning (±) 0.01 ° 0.01 °
Brake Clamp Force 1000 lbf 4448 N
Brake Diameter 14.4 in 366 mm
Control Type Interpolated Motion and Positioning Interpolated Motion and Positioning
SECONDARY SPINDLE S.A.E METRIC
Chuck Size 8.3 in 210 mm
Spindle Nose A2-5 A2-5
Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive
Max Rating 20.0 hp 14.9 kW
Max Speed 4800 rpm 4800 rpm
Max Torque 110 ft-lbf @ 700 rpm 149 Nm @ 700 rpm
Spindle Bore ø 2.00 in 50.8 mm
Bar Capacity 2.00 in 51 mm
SECONDARY SPINDLE POSITIONING S.A.E METRIC
Brake Clamp Force 500 lbf 2224 N
Brake Diameter 7.0 in 178 mm
Control Type Positioning Only Positioning Only
TURRET S.A.E METRIC
Number of Tools 12 Stations 12 Stations
OD vs ID Tools Any Combination (will vary with turret) Any Combination (will vary with turret)
Boring Bar Rear Clearance (from back of turret ) 4.00 in 102.0 mm
LIVE TOOLING S.A.E METRIC
Max Speed 6000 rpm 6000 rpm
Drive Ratio 1:1 1:1
Tooling BMT65 BMT65
GENERAL S.A.E METRIC
Coolant Capacity 55 gal 208 L
AIR REQUIREMENTS S.A.E METRIC
Air Required 4 scfm @ 100 psi 113 L/min @ 6.9 bar
Inline Air Hose 3/8 in 3/8 in
Coupler (Air) 3/8 in 3/8 in
Air Pressure Min 80 psi 5.5 bar
ELECTRICAL SPECIFICATION S.A.E METRIC
Spindle Speed 4500 rpm 4500 rpm
Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive
Spindle Power 30.0 hp 22.4 kW
Input AC Voltage (3 Phase) - Low 220 VAC 220 VAC
Full Load Amps (3 Phase) - Low 70 A 70 A
Input AC Voltage (3 Phase) - High 440 VAC 440 VAC
Full Load Amps (3 Phase) - High 35 A 35 A


Equipped With

HAAS CNC CONTROL
MAIN AND SUB SPINDLE WITH 3-JAW CHUCKS (1) SAMCHULLY, (1) KITAGAWA,
ROYAL 16C COLLET CHUCK
AUTO JET AIR BLAST
AUTOMATIC TOOL PRESETTER
EARLY POWER FAILURE DETECTION
ETHERNET INTERFACE
750 MB EXPANDED MEMORY
3 EPPINGER 4.200.956 STRAIGHT DRIVEN TOOL HOLDERS
1 RIGHT ANGLE DRIVEN TOOL HOLDER
MISC TURRET TOOL HOLDERS
INTERNAL HIGH VOLTAGE ISOLATED TRANSFORMER
BELT TYPE CHIP CONVEYOR
WORK GAUGING PROBE
LIVE TOOL TURRET WITH C-AXIS
Y-AXIS MOTION ON TURRET
USER DEFINED MACROS
PARTS CATCHER SYSTEM
RIGID TAPPING
SPINDLE ORIENTATION
VB 24 HYBRID VDI TURRET
NEW PRICE APPROX $185,000

HAAS DS-30SSY, MAIN AND SUB SPINDLE, Y-AXIS,C-AXIS, LIVE TOOLS, 3" BAR, 4500 RPM, 30 HP NEW 2015

Stock Number

12197