Eurotech (Biglia) Multipla B465-T3-Y3 CNC Mill Turn Center (3 Turrets) Tool for AR-15 Bolt & Bolt Carrier

Manufacturer

Eurotech (Biglia)

Manufacturing Year

2016

Serial Number

12887

Model
B 465-T3-Y3
Location

Prospect Heights, IL

Type
CNC Lathes
Request a Quote
Specifications Below
Specifications

Part Setup and Test Cut of AR-15 Bolt and Bolt Carrier
AR-15 Bolt Carrier LMW-710-010-10:
Estimated Cycle time to be 8.5-10 min.
LWM 710-010-20 Bolt Carrier:
We estimate cycle time to be 8.5-10 minutes
AR-15 Bolt 5.56 LMW-750-010
Not to exceed 5 minutes and 30 seconds. Time study not completed, upon receipt of purchase order we will provide all time studies needed.
MACHINING CAPACITY
Max. Machining diameter mm 70
Max. Machining length mm 200
Max. Workable length mm 230
Max. Diameter swing mm 220
MAIN SPINDLE
Max. Speed rpm 4000
Spindle nose ASA 6"
Spindle bore mm 78
Inside diameter of bearings mm 110
Chuck diameter mm 165/210
Motor power kW 26 (diagram 1)
C axis: min. programmable value 0,001°
SUB-SPINDLE
Max. Speed rpm 5000
Spindle nose ASA 5"
Spindle bore mm 55
Drawtube inside diameter mm 45
Inside diameter of bearings mm 90
Chuck diameter mm 165
Motor power (see diagram 2) kW 11
C-axis: min. programmable value ° 0,001°
B-axis: stroke - rapid traverse mm-m/min 655 - 30
UPPER TURRET (1-left)
UPPER TURRET (2-right)
LOWER TURRET 3
No of tools N° 12
Turret indexing (1 pos) sec 0,15
No of live tools N° 12
Max. Speed rpm 4000
Motor power (see diagram 4) kW 3,7
X1-X2-X3 axis: stroke - rapid traverse mm-m/min 170 - 18
Z1-Z2 axis: stroke - rapid traverse mm-m/min 230 - 30
Z3 axis: stroke - rapid traverse mm-m/min 540 - 30
Y1-Y2-Y3 axis: stroke - rapid traverse mm-m/min 90 [-40/+50] - 9
COOLING SYSTEM
Tank capacity l 450 450
Motor rating of 4 electro pumps kW 4,8
DIMENSIONS AND WEIGHT
Machine with swarf conveyor mm 4550 x 2110 x 2210 h
Spindle centre height mm 1115
Machine weight with swarf conveyor kg 8200

Investment:
One – Multipla B465 T3-Y3 Universal Turning and Milling Machine ... $ 503,200.00
One – Upgraded Spindle (2.75”) ...$ 5,200.00
One – Fanuc 31i 32-Bit hi-speed Pentium control ...$ Included
Two – Double tool probe ........................................ $ Included
One – Eurotech tool monitoring system ................. $ Included
One – Sub-spindle ejector and airblow ................... $ Included
One - Standard Tool Holder and Work Holding Package ... $ Included
Tool Holder Package for LMW71001020, LMW71001010 and LMW750010
One – Special Setback 9/32 Boring Bar Holder ........ $ 1,800.00
One – Special Setback Triple Boring Bar Holder with Coolant through ...$ 2,700.00
One – P144-00118 Double X Axis Live Tool ER 25 .................................. $ 3,400.00
One – P144-00190 0-90 Adjustable Live Tool ER-25 ............................... $ 5,800.00
Two – T134-00077 Z Axis Live ER32 ........................................................ $ 5,200.00
Five – P144-00112 X axis HD Coolant through live tool .......................... $ 16,000.00
Three – P144-00110 X axis HD live tools ER32 ........................................ $ 7,800.00
Six – T134-00061 X axis live tools ER32 ................................................... $ 8,400.00
Accessories
One – Coolant through the Sub-Spindle ......................................... ...... $ 3,400.00
One – Jet Stream High Pressure Coolant System T1, 1,000psi, T2 and T3 500psi each ...... $ 16,900.00
One – Multi-Tap Transformer ......................................................................................... $ 1,850.00
Barloader
One – Edge Technologies Patriot 551/12’ Magazine Bar Feeder with Remnant Retract ..... $ 29,900.00
One – High Voltage Transformer for Eurotech Elite 400 Volt Requirement....................... $ 1,500.00
One – Factory Trained Technician Install ................................................... $ 3,100.00
One – Guide Channel Set Complete Package ................................... ......... $ Included
One – Spindle Liner, Revolving Tip, Nose Liner, Pusher .............................. $ Included
Four – Remnant Collets up to 38mm ........................................................... $ 500.00
One – LNS Mist Collection Systems installed ............................................... $ 3,800.00
Software
One – ESPRIT License- MillTurn FreeForm 3 Axis Milling ............................ $ 22,100.00 ORDER

Includes Base License, SolidWorks, DXF, DWF, Parasolid, ACIS, IGES, Esprit SolidTurn Production 3 turret, 2 spindle lathe, ESPRIT SolidMillTurn Traditional, ESPRIT SolidMillTurn Advanced, ESPRIT SolidMillFreeform 3-Axis, Profit Milling, HTML and Excel Report Generator, Advanced Solid Modeler, Solid Simulation and machine simulation, 90 day software maintenance contract
One – Software Maintenance Extension 12 months ...................................... $ 2,637.50
One – Post Processor and machine setup Eurotech B465T3Y3 ...................... $5,000.00
One – Techna Tool TK94A/LR Installed ........................................................... $ 2,600.00
One – Internal Machining Compartment Camera, Wi-Fi capable with alarm notification ... $ 2,600.00
Services
One – Level Two Engineering and part test cut for one part ............................ $ 10,000.00
Eurotech will run one part guaranteed to meet 80% of cycle time quoted. Customer responsible for all perishable tooling, cutting fluids, tooling collets, remnant collets, work holding collets, part gauging and inspection equipment, and raw material barstock.
One – Run-Off ....................... $ 7,000.00
Includes Shipping, Rigging, Handling and, Installation of machine and barloader both at Customer’s and QMS TC
One – Freight for Accessories equipment .................... $ 550.00
One – Installation and Startup ...................................... $ Included
Amendment
One – PC 36 Parts Accumulator Table ......................... $ 7,250.00
Note: Table to be run off separate 110V outlet.
One – 6” Table Feed Conveyor Belt ............................ $ 2,981.25
One – 56 mm Guide Channel Set for Patriot 551 Barfeeder ... $ 3,703.09
Note: to include Pusher, Revolving Tip, Nose Liner, and Spindle Liner.
One – T134-00061 X-Axis Live Tool Holder ER32 Standard ..$ 700.00
Base Machine including all above accessories..................$687,571.84


3 Turrets, 3 Y-Axis, 2 Spindles, 78mm Bore, 4000 RPM, Edge B.F., Fanuc CNC, Tool for AR-15 Bolt & Bolt Carrier, "Like New" 2016

Stock Number

12153