RAS FLEXIBEND 73.30 CNC FOLDING MACHINE, NEW 2021
Folding MachinesUpper beam
The upper beam impresses with large open spaces in front of and behind the beam. The tools are clearly visible to the operator when working on large parts from the rear. As the tool seat automatically clamps the tools, the set-up is done in no time.
Fast movements for closing/opening
Hemming: closed, open, tear-drop hems
Large free space in front of the upper beam (part design flexibility)
Rigid upper beam for straight bends
Long and deep guiding system (excellent bend results)
Housed spindle in a sealed oil bath (low maintenance)
Normal and reduced speed (part positioning at marks
Folding beam
The folding beam is the most important component of folding machine. The intelligent crowning system automatically compensates for any folding beam deflection, caused by the bending forces. The FLEXIbend achieves straight bends on thin or thick sheets, all types of material, long or short flanges, bending in the machine center or on the side. The automatic sheet thickness and bend radius adjustment increases productivity and flexibility!
Fast movement: short production time
Deep folding beam: excellent bend results
Automatic adjustment to sheet thickness and bend radius
Clamps the segmented tools automatically
Display shows the folding beam and lower beam position
Simple and error-free machine calibration
Sheet support and gauging system
This combined gauging and sheet support system holds the weight of the panel, positioning it exactly and makes part rotation simple and productive. The stop fingers position the part for each bend. All fingers disappear automatically when the operator wants to rotate the workpiece. For large parts, the rectangular gauging system can be extended to a J- or U-shape table.
Working with repeating accuracy
No 2nd operator (50% cost saving)
No marking (30% time saving)
Supports the weight of the part
Adaptable to job assignment and space conditions
Squaring arm for narrow and long parts
Ball casters in sheet support panels (easy handling)
Tooling system
The high-strength and precision-ground upper beam tools are automatically clamped in the tool seat. No other tool system offers so much free space for all imaginable folding geometries. Handy tool segments of maximum make tool setups extremely simple.
Large free spaces for flexible part designs
Radius tools and special shapes on request
Short set-up times: handy tools and automatic tool clamping
Individually manufactured precision tools (retrofitable)
Folding beam tool widths suitable for thickness and Z-bends
Quick tool cahnges due to automatic tool clamping
Incline folding beam tool for internal bends (windows, louvers)
Segmented lower beam tools for reverse flanges
Finger pockets in lower beam tools for small gauging dimensions
Touch&More control
Use your finger to draw the part with flanges and angles on the screen of the Touch&More control. The software shows the part together with tools and machine components in the later working situation.
Control panel on an arm
Drawing of the part with the finger
For most workpieces automatic part programming
Technology tables (angle correction/unfolded length)
Programm, part and actual bending step are shown at a time
Program library
Operator guidance (text and symbols)
Speed Optimizer for 15% less cylce times
EasyGo program for occasional operators
Technical Data
Technical Data FLEXIbend (mm) RAS 73.30
Working length 3200 mm
Material thickness max 3.0 mm
Upper beam upstroke max 300 mm
Gauging system (Rectangular gauging system) 10-1550 mm
Gauging system (J gauging system) 10-3050 mm
Machine dimensions (Rectangular gauging system) 4360 x 2360 mm
Machine dimensions (J gauging system) 4360 x 3850 mm
Technical Data FLEXIbend (inch) RAS 73.30
Working length 126″
Material thickness max 11 ga
Upper beam upstroke max 11.8″
Gauging system (Rectangular gauging system) 0.39″-61″
Gauging system (J gauging system) 0.39″-120″
Machine dimensions (Rectangular gauging system) 172″ x 93″
Machine dimensions (J gauging system) 172″ x 152″
CNC TOUCH SCREEN CONTROLS
J TYPE BACK GAUGE