2021 LAGUNA SMARTSHOP 2 CNC ROUTER

SmartShop® 2 Elite
Cabinets - Signage - Production - Furniture
This machine is ideal for high production sheet processing operations. Combining a heavy all-steel frame, FANUC® controls, and servos running on helical rack and pinion, the SmartShop® 2 Elite gives you the confidence to handle the highest production loads with ease while ensuring accuracy and cut quality.
12HP HSD Spindle 5,000-24,000 RPM
Available In 4×8
8 Position ISO 30 Automatic Tool Changing System
750W FANUC® Servo Drive Motors
FANUC® Oi-MF PLUS Control System
Up To 2,500 IPM Rapid Speed
12″ Z-Clearance
14″ Z Travel
6 Zone Vacuum Table
Helical Rack & Pinion X,Y Axis, Ball Screw Z Axis
Heavy-Duty One-Piece All-Steel Frame

Machine Specifications SS2
Motor Drive+A2:A39 Delta brand VFD-E variable frequency drive.
Spindle 11 HP HSD (Italian) Electrospindle ISO-30 (ATC), Ceramic Spindle Bearings.
Spindle RPM 6,000 - 24,000 RPM
Controller Lagun Touch” Series CNC Controller. Machine features the Networking, Connectivity and online Troubleshooting. Runs industry standard "G-Code". Program transfer to the controller can be accomplished with USB, Ethernet.
Remote Vacuum PUMP
Control at the Operator Station Yes
Dust Chute Diameter 4" Inches
Volts 208-220 volts 1 or 3 phase
Amps Dependent on the Vacuum Pump Selection.

X, Y and Z Axis Travel
48" x 96" x 9.5" axis travel (4' x 8' Model)
Gantry Clearance 11" Inches
Machine Work Table
48.0" x 96.0" (4' x 8' Model)
Rapid Travel/Cutting Speed
720 rapids,550 cutting
Heavy-Duty Welded Tubular Steel Frame
3,500 lbs. - 4,500 lbs. (Depending on Model)
Machine Foot Print
80" x 140" (4' x 8' Model)
`
Machine Specifications SS2

49.0" x 97.0" x 8.0" (4' x 8' Model)

Vacuum Table with T-slots Yes
25 mm heavy-duty HiWin HG Series linear
bearings and rails on all axis. Yes
Helical Rack-and-pinion drives on “X” and “Y” axes and precision-ground ball screw drive on “Z” axis.
Yes
Gantris driven on each end (two “helical” rack-and-pinion drives on “Y” axis).
Yes
Limit Switches. Solid State
Expandable control system for custom
applications. Yes
Spindle Speed control through
programming. Yes
Manual overrides of Spindle Speed and
feed speeds during run. Yes
Centralized Lubrication System. Yes
10 HP Vacuum Pumps. Yes
Vacuum monitoring gauge. Yes
ISO-30 tool holders, collets and precision
collet nuts. 30 amp
Automatic Tool Changer with 8-position
tool rack. Yes