10' X 2.55" MG Model M3065I 4 Roll CNC Plate Bending Roll, New 2017

SPECIFICATIONS AND CAPACITIES
Working Length 10.17' / 122" / 3,100mm
Rolling Capacity (Mild Steel) 2.55" / 65mm
Pre-Bending Capacity (Mild Steel) 1.96" / 50mm
Top Roll Diameter 24.8" / 630mm
Bottom Roll Diameter 22.5" / 570mm
Side Roll Diameters 18" / 460mm
Working Height 105" / 2,655mm
Plate Roll Dimensions 250"L x 137"W
Installed Power 75 HP
Approx. Machine Weight 132,000 lbs.
Drive System Directly Splined on the Roll Shaft
Maximum Speed 5 Meters Per Minute
Hardening (Induction) 50-58 HRC
Rolls C45 Alloy Steel
Geometry Planetary
Rolls Diameter, Weight and Dimensions have to be calculated during the design phase.
The max performances are referred to shells of diameter equal or larger than3 times the
top roll diameter and with material with a yield point within R = 260 N / mm².

STANDARD EQUIPMENT
Movable Console
Hydraulic system for opening the machine and ejecting the tube.
Safety system to conform to EC Rules.
Electro welded monolithic structure normalized and machined on the new generation CNC
boring machines.
Exclusive integrated hydraulic system developed for top performance.
Parallelism control by means of massive torsion bars to guarantee height precision also
where the newest hydraulic systems fail.
Permanent lubrication system.
Planetary movement of the rolls to avoid any kind of friction and to guarantee
high precision for the machine life.

MINIMUM ACHIEVABLE DIAMETER:
The minimum possible diameter to be bent depends on several factors such as:
Top roll diameter
Plate thickness
Material
The machine top roll diameter influences the performing of the minimum diameter for the simple
fact that we won’t get a lower diameter than the top roll one.
As for the plate thickness, let’s say we are using a machine with maximum capacity 100mm, on
a 3mt length. We wish to bend a plate working at the maximum capacity. In this case the
minimum possible diameter we’ll get will be three times the top roll one. Let’s say now we wish
to use the same machine at 60% of its maximum capacity, the case we wish to bend a 3mt plate
with a 60mm thickness. At this point the minimum diameter we get will be 1.1 times the top roll
one.
D min (Full Capacity) = 3 times the top roll diameter
D min (60% of Capacity) = 1.1 times the top roll diameter
Quantum Plate Bending Machines are designed and built on a basis of 260 N/mm2 yield point
material.

M3065I - RETROFITTED 4 Roll Plate Bender
Normally $387,200
Equipped with Basic Entry-Level Control with Digital Displays
Digital Displays for both Bottom Rolls
Conical Bending System
Hardened Rolls
Control on Wheels
Hydroelectric Calibration
Available in either 220V / 3PH or 480V / 3PH (Customer's Choice)
(Machine shipped without oil - Customer is responsible for putting oil.)
$290,000 1 $290,000
Quantum CNC EVO Control $21,500 1 $21,500
Double Side Arm Support (Right-Side) $14,500 1 $14,500
Top Vertical Support $24,300 1 $24,300
Brake on Motor $7,000 1 $7,000
20 Foot Powered Inclined Table (Left-Side) $48,000 1 $48,000
Total $405,300
CNC Bending Roll

SPECIFICATIONS AND CAPACITIES
Working Length 10.17' / 122" / 3,100mm
Rolling Capacity (Mild Steel) 2.55" / 65mm
Pre-Bending Capacity (Mild Steel) 1.96" / 50mm
Top Roll Diameter 24.8" / 630mm
Bottom Roll Diameter 22.5" / 570mm
Side Roll Diameters 18" / 460mm
Working Height 105" / 2,655mm
Plate Roll Dimensions 250"L x 137"W
Installed Power 75 HP
Approx. Machine Weight 132,000 lbs.
Drive System Directly Splined on the Roll Shaft
Maximum Speed 5 Meters Per Minute
Hardening (Induction) 50-58 HRC
Rolls C45 Alloy Steel
Geometry Planetary
Rolls Diameter, Weight and Dimensions have to be calculated during the design phase.
The max performances are referred to shells of diameter equal or larger than3 times the
top roll diameter and with material with a yield point within R = 260 N / mm².