MORI SEIKI NT1000WZ MULTIAXIS CNC TURN MILL CENTER NEW 2009

Manufacturer

MORI SEIKI

Manufacturing Year

2009

Serial Number
Model
NT1000WZ
Location

ON LOCATION

Type
CNC Lathes
Request a Quote
Specifications Below
Specifications

MAX WORK PIECE SWING 14.57”
SWING OVER CROSS SLIDE 14.57”
SWING OVER CROSS SLIDE, TURRET 2 11.81”
MAX TURNING DIAMETER, TOOL SPINDLE 14.57”
MAX TURN DIA, TOOL SPINDLE/TURRET 2 10.63”
MAX TURNING LENGTH 16.69”
BAR WORK CAPACITY 2.05”
TRAVELS:
X1-AXIS, TOOL SPINDLE 14.96”
Y-AXIS, TOOL SPINDLE +4.13”
Z1-AXIS, TOOL SPINDLE 18.11” + 6.10” (ATC TRAVEL)
B-AXIS, TOOL SPINDLE +120 DEGREES
X2-AXIS, TURRET 2 6.10”
Z2-AXIS, TURRET 2 24.01”
C-AXIS .001 DEGREES
MAIN SPINDLE:
SPINDLE SPEED 6,000 RPM
NUMBER OF SPINDLE SPEEDS, STEP 2, WOUND ROTOR
SPINDLE NOSE TYPE JIS A2-5
THROUGH SPINDLE HOLE DIAMETER 2.4”
MINIMUM SPINDLE INDEXING ANGLE 0.0001 DEGREES
SPINDLE BEARING INSIDE DIAMETER 3.94”
B-AXIS MILLING SPINDLE, TURRET ONE:
NUMBER OF TOOLS ON HEAD 1
MINIMUM B-AXIS INDEXING ANGLE 0.0001 DEGREES
MAXIMUM TOOL SPINDLE SPEED 20,000 RPM
SPINDLE SPEED, STEP ONE 1,800–5,000 RPM
SPINDLE SPEED, STEP TWO 5,000–18,000 RPM
SPINDLE SPEED, STEP ONE 18,000–20,000 RPM
INSIDE DIA., TOOL SPINDLE BEARING 2.56”
AUTOMATIC TOOL CHANGER:
NUMBER OF TOOL POSITIONS 38
MAXIMUM TOOL DIAMETER 2.76”
MAXIMUM TOOL DIAMETER, NO ADJACENT 5.12”
MAXIMUM TOOL WEIGHT 11 LBS
LOWER TURRET, TURRET 2:
NUMBER OF TOOLS 8
SQUARE SHANK HEIGHT OF SGL POINT TOOL . 79”/20 MM
SHANK DIAMETER OF BORING BAR 1.26” / 32 MM
MOTORS:
SPINDLE DRIVE MOTOR, 30 MIN/CONT. 15 HP/10 HP
TOOL SPINDLE MOTOR, 40%/CONT. 7.5/5 HP 1,800 – 18,000 RPM)
TOOL SPINDLE MOTOR, 40%/CONT. 5/3 HP 18,000–20,000 RPM)
MACHINE WEIGHT 18,700 LBS


Equipped With

CNC CONTROL:
FANUC MSX-711IV MAPPS-III CNC CONTROL
5 SETS M-CODES
PROGRAMMING RESOLUTION BY 1/10
EQUIPPED WITH:
MICROCENTRIC CB65 HYDRAULIC CHUCK
FULL CONTOURING B-AXIS MILLING SPINDLE
36-POSITION AUTOMATIC TOOL CHANGER
8-POSITION LOWER TURRET WITH 200MM EXTENDED TRAVEL
TAILSTOCK FOR LOWER TURRET
RENISHAW PROBE SYSTEM
HINGE BELT CHIP CONVEYOR, RIGHT SIDE
150 PSI THROUGH SPINDLE COOLANT
COOLANT FILTRATION SYSTEM
HYDRAULICS THROUGH TURRET I/F

10.6" DIA. X 16.7" MAX LENGTH, 5-AXIS HEAD, SPINDLE 6000 RPM, TOOL SPINDLE 20,000 RPM, 36 ATC, LOWER TURRET, PROBE, TSC, FANUC MSX-711IV MAPPS CNC NEW 2009

Stock Number

12543