MAKINO A51-NX 4-AXIS PRECISION CNC HORIZONTAL MACHINING CENTER NEW 2018 100 HOURS

Manufacturer

MAKINO

Manufacturing Year

2018

Serial Number

N/A

Model
A51-NX
Location

ON LOCATION

Type
Other
Request a Quote
Specifications Below
Specifications

2018 Makino A51-NX 400mm CNC Horizontal Machining Center . Absolutely Beautiful 2017 Makino A51-NX 400mm Horizontal Machining Center. This unit comes loaded with options including a 14,000RPM HSK-63 Spindle, 300PSI TSC, Full B-Axis, 133 Pocket Tool Magazine, Chip Conveyor, an extra 400mm Tapped Pallet and More.

Pallet:
15.7" x 15.7"
X: 22.0" Y: 25.2" Z: 25.2"
Spindle RPM:
14,000 rpm (14K High Torque, 20K)
Spindle Taper:
40 (HSK63)
Rapid Traverse:
2,362 ipm
Cutting Feedrate:
1,968ipm
Maximum Workpiece:
ø24.8" x 35.4"
Maximum Payload:
880 lbs
ATC Capacity:
60 tools (optional 40, 134, 219, 313)
Tool to Tool:
0.9 secs
Chip to Chip:
2.2 secs
Maximum Tool Length (Cat):
16.9"
Maximum Tool Length HSK:
16.5"
Maximum Tool Diameter:
6.7"
Maximum Tool Weight:
26.4 lbs

Includes:
01000- 14,000 RPM Spindle 50-14,000 RPM 50 HP duty rated, 30 HP continuous. 223 ft lb duty rated, 88 ft lb continuous.
01010- Rigid Tap
13004- DD Motor Rotary Table
13005- Pallet Clamp Confirmation Function
13809- Feed Axis Acceleration X/Y = 1 G/1 G
13800- Automatic Grease Supply Device (LUBE)
16008- White Color Base/Texture
19000- Pallet Changer
19003- Pallet Changer Safety Cover
19025- APC Door Interlock
19006- Random Pallet Selection
27000- 400mm Tapped Hole Pallet Specification (for 2 pallets), 400mm (15.7 inch) square tapped hole pallets with 24, M16
tapped holes.
29000-Eight (8) Nozzle Coolant, Eight (8) coolant nozzles positioned around the spindle face.
29001- Overhead Shower Coolant System, 22 Nozzles
29017- Terrace Washing Coolant
29005- 300 psi Through Spindle Coolant and Air, 300 psi @ 7.9 gpm (60Hz) Through Spindle Coolant system and Air.
29022- Water Soluble Coolant
30000- Lift-up Chip Conveyor, Left discharge lift-up conveyor. Tank capacity 515L (136 gallons). Not available for 313 ATC
30020- Secondary Filter For Through Spindle Coolant
31000-Automatic Splash Guard, Includes door lock and LED light.
31016- Operator Door Lock (Operation Mode)
32000- Air Dryer
37001- Vision B.T.S. (Broken Tool Sensor), Vision BTS mounted in ATC magazine.
37065-1/0 Interface for Measurement, 1/0 Interface Board necessary for retrofitting US supplied probing options.
42000- Automatic Fire Extinguish Interface
47038- Portable Manual Pulse Generator with the Handle Enable Button
47006- Signal Light 3-Layer
47201- Language (English)
47250- Screen Language Type A
47550- Manuals Language Type A: Includes Instruction Manual, Periodic Maintenance Manual, and Operation Manual in
CD and paper media. Also includes Pro6 Operation Manual, M code list, and parts manual in CD media only.
47560- FANUC Manuals Language Type A: Includes FANUC Instruction Manual, Parameter Manual, and Maintenance
Manual in CD media only.
47570- Maintenance/ Installation Manual: Provided in both CD and paper media.
47801- Legend Plate (English)

48001- Unit Inch
48027- Inspection Reports in Metric (only for MM) 48007- FANUC Guarantee (2 years)
51001- 60Hz
52005- 460V
53003- UL Electrical Specification: Electrical components in machine' s main electrical cabinet are UL rated. 57006- Number of Primary Control Axes : 4 Axes
59010- Linear Interpolation Type Positioning
59000- Helical Interpolation (G02,G03): Allows circular interpolation of any two (2) axes while also interpolating a linear axis.
61000- User memory 2GB+1GB
64000- External Setting Type Spindle Orientation: Orient the spindle to any angle via M-code, increment amount is 0.1 degrees.
65015- Tool Offset Memory C: Fanuc Tool Offset Screen includes H, H (wear), D & D (wear). 65005- Tool Offset 400 Pairs: Fanuc Tool Offset Screen contains registers for 400 tools.
66003- Workpiece Coordinate System Pairs 54 (6+48) *See quote notes* 67001- Optional Block Skip: Total 9
67006- Program Quick Restart Function *See quote notes• 67005- Rigid Tapping Retract Function
68012- Custom Macro Common Variables 1100: Includes Common Variables #100 to #199 (non-holding type) & #500 to #1599 (holding type)
L6635- Scaling (G51/G50): Generates a percent multiplier of X and Y axis dimensional moves to increase or decrease size of output geometry.
68018- Macro Variable File Output Function *See quote notes• L6567- Coordinate System Rotation (G68/G69)*See quote notes• 69000- High Speed Skip*See quote notes*
69001-Adaptive Control Function (AC Function)*See quote notes* 72004- GI Control*See quote notes•
76000- Energy Saving Function L6609- Eight Digit
a51nx TRANS- Transformer
L6527- Machine Standard Supplies: Includes 10oz of Spindle Taper Lube and Semi-Glossy Touchup Paint


Equipped With

MACHINE Options For Machine: a51nx_B SHANK
04003- HSK-A63 Spindle Interface ATC
14005- 133 Tool ATC (Includes Tool Load Station) *See quote notes• 14011- HSK Pot for 133 Tool ATC
Pallet
27002- Additional 400mm Tapped Hole Pallet(s): Each 400mm (15.7 inch) square. Coolant
29010- Coolant Temperature Controller with Heater {1.5/2.0kW) Splash guard
L6491- Mist Blaster Mist Collector with HEPA Filtration Monitoring system
L6478- PQI / Renishaw OMP400 & NC4S Probe System Combo (Retrofit) L6170- PQI Domestic Travel
Packing/Lifting fixture/Anchor bolt
48528- Export Packing F (Ro-Ro vessel) CONTROL Options For Machine: a51nx_B 72000- Super GI .5 Control
5 axis function
74520- Rotary Table Dynamic Fixture Offset

Tool holders
extra pallets
tombstones
Haimer schrink fit machine
all available at additional cost

MAKINO A51-NX, FULL 4TH, 400 X 400 PALLETS,
22"X 25"Y 25"Z, 14,000 RPM, 50HP, 133 ATC, COOLANT THRU, HSK-63, LOADED, 100 HOURS, NEW 2018

Stock Number

12494