KMT ROBOTRIM CNC TWIN ROBOTIC 7 AXIS ROUTER NEW 2012

Manufacturer

KMT ROBOTICS

Manufacturing Year

2012

Serial Number

N/A

Model
KMT ROBOTRIM
Location

ON LOCATION Michigan

Type
CNC Routers
Request a Quote
Specifications Below
Specifications

KMT ROBOTRIM® ROUTER TRIMMING SYSTEM

RoboTrim® Router Trimming System consists of TWO floor mounted robotS
equipped with an electric router spindle, and a pair of servo-controlled part positioners
located on a main turntable for processing parts
KMT AccuTrim® Fanuc M-710ic Robot Description
The KMT AccuTrim® Fanuc M-710ic robot has been configured and optimized by KMT for
improved path capability and faster cycle times. The robot has a wrist payload of 110
pounds. The Fanuc M-710ic was designed from the ground up to provide superior performance
for path accurate applications. The AccuTrim® Fanuc M-710ic utilizes the FANUC R-30iA robot
controller which supports the iPendant, an innovative color graphic user interface
device to the robot controller, based on Internet technology.
KMT AccuTrim® Fanuc M-710ic Router Trimming Robot
−Six Axis Mechanical Unit (50 kg Maximum Payload, 2.050 m Reach)
−Remote B-Size R-30iA Controller
−iPendant with 10m Cable
−Collision Guard Software
−Standard mechanical unit and controller documentation set
This controller provides the following features / benefits:
−Maintain same path regardless of:
−T1 / Auto mode, speed override
−Hold / stop / resume
−I/O wait commands
−Cycle time improvements
−Process Speed “Overdrive”
−Reduce cycle time while maintaining the same path
−LD (Linear Distance)
−Specify distance to maintain along a linear move
CR (Corner Region)
−Maintain path in corners regardless of program speed
−MaxSpeed
−Improve cycle time by reaching joint velocity limit along linear path

Collision Guard Software

RouterWare® Software

System Calibration Tools
KMT has included software tools to provide optimum performance of the system. These
System Calibration Tools include:
−TCPCal software
−RobotCal software
−CellCal software
−Menu driven software to perform tool center point check

3 HP Electric Router Spindle with Auto Tool Change
A 3 hp, 24,000 to 40,000 RPM, compact router spindle with
automatic tool change is included with the system.
Two (2) Colombo 3 hp electric spindle, including:
−24,000 to 40,000 RPM
−Compressed air cooled spindle
−Dual angular contact super precision bearings
−Spindle end of arm tooling bracket
−Robot dress-out package
−Collet and shaft wrenches
−Motor inverter
−Automatic tool change capability including:
−Two (2) tool holder racks, each with nine (9) tool holder locations
−Eighteen (18) ISO 20 ER 20 tool holders, nine (9) per tool rack for each Robot
−Eighteen (18) ISO 20 ER 20 collets, nine (9) per tool rack for each Robot
−Controls integration
−Mechanical integration to KMT supplied components
Servo-Controlled Rotating Table and Robot Mounting Structure
RoboTrim® Work Cell, Including:
−Robot mounting structure
−One (1) turntable for positioner mounting (two (2) position – 180indexing motion)
−Two (2) servo positioner mounting locations
−Dividing wall for operator safety (between positioner “A” and positioner “B”)
−FANUC Aux. Axis servo package
−Gear reducer package
−Limit switches
−Two (2) part positioners for fixture mounting (360motion)
−FANUC Aux. Axis servo package
−Gear reducer package
−Barrier guarding to surround the work cell, including:
−Solid steel side panels barrier guarding will mount directly to plant floor –
customer responsible for lagging
−One (1) maintenance access door with safety interlock
−One (1) set of light curtains at operator load area
−One (1) area scanner at the operator load area
−Palm button station, including:
−Cycle start button
−Emergency stop button

System Guarding

HMI and Touch Screen
System Controls, Including:
−Integration to robot controller
−Power supply, transformers
−Circuit breakers, terminals, relays, electrical accessories
−Robot in position sensor
−Junction boxes
−HMI and Touch Screen, Including:
−FANUC HMI interface
−Red Lion 10.4” Color Touch Screen
−Controls design
−Programming of system logic
−Robot programming can be done through the robot teach pendant

Fixture Identification Selection

KMT Remote Administration

SmartFile™: KMT File Maintenance Tools

Vacuum Controls, Including:
−Footswitch control for on/off
−Routing from fixture connection point at each positioner

Bar Code Reader Package, Including;
−One (1) hand held bar code scanner unit
−Bracket to hang the unit at the operator station of the workcell
−Controls and software integration at KMT


Equipped With

180 degree turntable with two fixture stations
two (2) Fanuc M-710ic/50 6-axis robots with router spindles
two (2) 18 position tool changers with tool length measurement
two(2) R-30iA Fanuc robot controllers with teach pendants
Microair dust collection system
KMT software package and electrical controls
for routing/trimming applications

KMT ROBOTRIM CNC TWIN ROBOTIC 7 AXIS ROUTER NEW 2012, (2) 3' X 6' FIXTURE TABLES, (2) 3 HP TRIM ROUTERS MOUNTED ON FANUC ROBOTS, TOOL CHANGERS, VERY FAST TRIM ROUTERS

Stock Number

12477