| X | 137.7" |
| Y | 13.7" |
| Z | 11" |
| Power | 8 hp |
| RPM | 21,000 RPM |
Standard Table Area 137.7"
Table Capacity, X-Axis Routing Capacity Face Side 137.7"
Table Capacity, Y-Axis 13.75"
Routing Capacity Top 9"
Routing Capacity Front 7"
Table Capacity Z-Axis 11"
Routing Capacity Top 11"
Step over Capacity 7.3"
Rapid Positioning Y-Z Axes (Max.) 1,176"/Min
Rapid Positioning X-Axes (Max.) 1,968"/Min
Max. Spindle Speed 21,000 RPM
Power output, Router Spindle 8.1 HP,480 Volt,3
Phase
Max. Profile Height/Ste Over Max. 11"
Software forced Front/Rear machining no step over from Front to Rear of profile
Head runs around Zero point.
Max. Diameter of Tooling 2.4"
Max. Diameter of Disk Cutter
Manual 7.87"
Automatic 3.62"
Max. Air Pressure 102 PSI
Max. Length of Tooling (Top) 7.9"
Max. Dia. Shaft for ER-32 Collet .78"
Max. Dia. Shaft for ER-16 Collet (Angle head Cap Collet) .511"
Max. Dia. Shaft for 077 Collet .394"
Tapping Capacity up to (w/Float Collet -ER32 Collet size) 0.375" @ 65% Thread
Tool Chuck HSK F63
Tool Holder For Auto Tool Change 4
Overall Machine Base Dimensions 62" x49.5"
Light Curtain Width 181.3"L x 88"H
Machine weight (approx) 3,605 Lbs
PC Based Control
Elusoft Software
Machining 3 Sides of Profile
Linear Guide for X Y Z Travel
Profile is held by adjustable Pneumatic Clamps
Automatic Tool Changer w/4 Top tool Holders & 1 Angle Head
Horizontal Pneumatic clamps
Pulse Spray Mist Coolant System
Tool Height Guage
