Adjustable:
Degree of bends 185 Degrees
Distance between bends 72"
Range of tube diameters
Maximum capacity:
1 1/4" OD x 0.120 Mild Steel (1 tube/cycle)
1" OD x 0.083" Mild Steel (2 tubes/cycle)
1" x 1" x 0.134" Mild Steel (1 tube/cycle)
Bend torque 17,000 in-lbs per head
Estimated production rate: Hand Load & Unload
One tube per cycle 400-600 per hour
Two tubes per cycle 500-900 per hour
Minimum distance:
Between bends 6.25" Standard
Tangent to tangent 5.65" Optional
Maximum distance: Between Bends 72" Standard
Degree of bend:
0-120 Degrees when using both bend heads
0-185 degrees when using one bend head
Bend tooling available: 2"-5.5" CLR, one or two tubes per cycle
Hydraulic power unit 20 HP with forced air
oil cooler
Degree of bend adjustment: Through mechanical indicator attached
to adjustment screw
Distance between bends adjustment: Manual wheel adjustment by Acme
screw with digital indicator
Electrical 480 VAC, 30, 60 Hz
(2) Bending Heads, (1) Set of Tools 2" Inside Radius, 1" Square Tubing
72" Max. Distance Between Bends
